This is the prime chain origin stored in the block header. It is a composite number (not prime itself) — it equals the first prime in the chain multiplied by a primorial. The origin anchors the entire chain to this specific block.

3.054 × 10⁹⁴(95-digit number)

30549330471315294884…95200310357931062400

Discovered Prime Numbers

Lower: 2^k × origin − 1 | Upper: 2^k × origin + 1

These are the actual prime numbers discovered by this block, computed using the verified Primecoin formula. Each number has been independently confirmed to pass the Fermat primality test. Use the FactorDB links to verify any number independently.

Level 0 — Twin Prime Pair (origin ± 1)

origin − 1

3.054 × 10⁹⁴(95-digit number)

30549330471315294884…95200310357931062399

Verify on FactorDB ↗Wolfram Alpha ↗

origin + 1

3.054 × 10⁹⁴(95-digit number)

30549330471315294884…95200310357931062401

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: origin + 1 − origin − 1 = 2 (twin primes ✓)

Level 1 — Twin Prime Pair (2^1 × origin ± 1)

2^1 × origin − 1

6.109 × 10⁹⁴(95-digit number)

61098660942630589769…90400620715862124799

Verify on FactorDB ↗Wolfram Alpha ↗

2^1 × origin + 1

6.109 × 10⁹⁴(95-digit number)

61098660942630589769…90400620715862124801

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^1 × origin + 1 − 2^1 × origin − 1 = 2 (twin primes ✓)

Level 2 — Twin Prime Pair (2^2 × origin ± 1)

2^2 × origin − 1

1.221 × 10⁹⁵(96-digit number)

12219732188526117953…80801241431724249599

Verify on FactorDB ↗Wolfram Alpha ↗

2^2 × origin + 1

1.221 × 10⁹⁵(96-digit number)

12219732188526117953…80801241431724249601

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^2 × origin + 1 − 2^2 × origin − 1 = 2 (twin primes ✓)

Level 3 — Twin Prime Pair (2^3 × origin ± 1)

2^3 × origin − 1

2.443 × 10⁹⁵(96-digit number)

24439464377052235907…61602482863448499199

Verify on FactorDB ↗Wolfram Alpha ↗

2^3 × origin + 1

2.443 × 10⁹⁵(96-digit number)

24439464377052235907…61602482863448499201

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^3 × origin + 1 − 2^3 × origin − 1 = 2 (twin primes ✓)

Level 4 — Twin Prime Pair (2^4 × origin ± 1)

2^4 × origin − 1

4.887 × 10⁹⁵(96-digit number)

48878928754104471815…23204965726896998399

Verify on FactorDB ↗Wolfram Alpha ↗

2^4 × origin + 1

4.887 × 10⁹⁵(96-digit number)

48878928754104471815…23204965726896998401

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^4 × origin + 1 − 2^4 × origin − 1 = 2 (twin primes ✓)

Level 5 — Twin Prime Pair (2^5 × origin ± 1)

2^5 × origin − 1

9.775 × 10⁹⁵(96-digit number)

97757857508208943630…46409931453793996799

Verify on FactorDB ↗Wolfram Alpha ↗

What this block proved

The miner who found this block proved the existence of 11 consecutive prime numbers forming a Bi-Twin Chain. The prime chain origin — the large number shown above — anchors the chain and is divisible by a primorial (the product of small primes), cryptographically tying these prime numbers to this specific block.

View full Prime Chain Discovery page →

★★★☆☆

Rarity

RareChain length 11

How Primecoin's Proof-of-Work Constructs These Primes

Primecoin stores a value called the prime chain origin in each block. The miner found a large integer such that when divided by a primorial (the product of small primes: 2 × 3 × 5 × 7 × …), the result is the first prime in the chain. The origin is deliberately divisible by this primorial — that divisibility is part of the proof.

Prime Chain Origin = First Prime × Primorial (2·3·5·7·11·…)

Source: Primecoin prime.cpp — CheckPrimeProofOfWork()

This is why the origin has many small prime factors — those factors are the primorial divisor. The chain then extends from the first prime using the TWN formula:

TWN: twin pairs (p, p+2) where p = origin/primorial − 1 and p+2 = origin/primorial + 1

Verify on a Primecoin Node

Anyone running a Primecoin node can independently verify this block using the following RPC commands. Run these from the primecoin-cli command line or via the debug console in the Primecoin wallet.

1. Get block hash by height

getblockhash 2700271

Returns the block hash for a given block height. Use this to confirm the hash shown above matches the chain.

2. Get full block data

getblock e887f35e91f44cd3f4d37174e6b450792d44641b9a28201abef86d0df4f9e5b5

Returns the full block header including difficulty, prime chain origin, prime chain type, transaction IDs, and all other fields shown on this page.

How to run these commands: To verify this data independently, open a terminal on your own Primecoin node and run primecoin-cli <command>. Alternatively, open the Primecoin-Qt wallet, go to Help → Debug Window → Console, and type the command directly. The node must be fully synced to this block height for the commands to return results.

Cross-reference on Chainz Explorer

Chainz is an independent Primecoin block explorer. Compare this block's data to verify accuracy.

View Block #2,700,271 on Chainz ↗

Block #2,700,271

Cookie Preferences