This is the prime chain origin stored in the block header. It is a composite number (not prime itself) — it equals the first prime in the chain multiplied by a primorial. The origin anchors the entire chain to this specific block.

5.807 × 10⁹³(94-digit number)

58078665266808175605…29212167333001606160

Discovered Prime Numbers

Lower: 2^k × origin − 1 | Upper: 2^k × origin + 1

These are the actual prime numbers discovered by this block, computed using the verified Primecoin formula. Each number has been independently confirmed to pass the Fermat primality test. Use the FactorDB links to verify any number independently.

Level 0 — Twin Prime Pair (origin ± 1)

origin − 1

5.807 × 10⁹³(94-digit number)

58078665266808175605…29212167333001606159

Verify on FactorDB ↗Wolfram Alpha ↗

origin + 1

5.807 × 10⁹³(94-digit number)

58078665266808175605…29212167333001606161

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: origin + 1 − origin − 1 = 2 (twin primes ✓)

Level 1 — Twin Prime Pair (2^1 × origin ± 1)

2^1 × origin − 1

1.161 × 10⁹⁴(95-digit number)

11615733053361635121…58424334666003212319

Verify on FactorDB ↗Wolfram Alpha ↗

2^1 × origin + 1

1.161 × 10⁹⁴(95-digit number)

11615733053361635121…58424334666003212321

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^1 × origin + 1 − 2^1 × origin − 1 = 2 (twin primes ✓)

Level 2 — Twin Prime Pair (2^2 × origin ± 1)

2^2 × origin − 1

2.323 × 10⁹⁴(95-digit number)

23231466106723270242…16848669332006424639

Verify on FactorDB ↗Wolfram Alpha ↗

2^2 × origin + 1

2.323 × 10⁹⁴(95-digit number)

23231466106723270242…16848669332006424641

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^2 × origin + 1 − 2^2 × origin − 1 = 2 (twin primes ✓)

Level 3 — Twin Prime Pair (2^3 × origin ± 1)

2^3 × origin − 1

4.646 × 10⁹⁴(95-digit number)

46462932213446540484…33697338664012849279

Verify on FactorDB ↗Wolfram Alpha ↗

2^3 × origin + 1

4.646 × 10⁹⁴(95-digit number)

46462932213446540484…33697338664012849281

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^3 × origin + 1 − 2^3 × origin − 1 = 2 (twin primes ✓)

Level 4 — Twin Prime Pair (2^4 × origin ± 1)

2^4 × origin − 1

9.292 × 10⁹⁴(95-digit number)

92925864426893080968…67394677328025698559

Verify on FactorDB ↗Wolfram Alpha ↗

2^4 × origin + 1

9.292 × 10⁹⁴(95-digit number)

92925864426893080968…67394677328025698561

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^4 × origin + 1 − 2^4 × origin − 1 = 2 (twin primes ✓)

Level 5 — Twin Prime Pair (2^5 × origin ± 1)

2^5 × origin − 1

1.858 × 10⁹⁵(96-digit number)

18585172885378616193…34789354656051397119

Verify on FactorDB ↗Wolfram Alpha ↗

What this block proved

The miner who found this block proved the existence of 11 consecutive prime numbers forming a Bi-Twin Chain. The prime chain origin — the large number shown above — anchors the chain and is divisible by a primorial (the product of small primes), cryptographically tying these prime numbers to this specific block.

View full Prime Chain Discovery page →

★★★☆☆

Rarity

RareChain length 11

How Primecoin's Proof-of-Work Constructs These Primes

Primecoin stores a value called the prime chain origin in each block. The miner found a large integer such that when divided by a primorial (the product of small primes: 2 × 3 × 5 × 7 × …), the result is the first prime in the chain. The origin is deliberately divisible by this primorial — that divisibility is part of the proof.

Prime Chain Origin = First Prime × Primorial (2·3·5·7·11·…)

Source: Primecoin prime.cpp — CheckPrimeProofOfWork()

This is why the origin has many small prime factors — those factors are the primorial divisor. The chain then extends from the first prime using the TWN formula:

TWN: twin pairs (p, p+2) where p = origin/primorial − 1 and p+2 = origin/primorial + 1

Verify on a Primecoin Node

Anyone running a Primecoin node can independently verify this block using the following RPC commands. Run these from the primecoin-cli command line or via the debug console in the Primecoin wallet.

1. Get block hash by height

getblockhash 2636032

Returns the block hash for a given block height. Use this to confirm the hash shown above matches the chain.

2. Get full block data

getblock d34650eb7e6d67736fcd6b47eadc92b42fa9b6f26d33794423edafbb370d9c4a

Returns the full block header including difficulty, prime chain origin, prime chain type, transaction IDs, and all other fields shown on this page.

How to run these commands: To verify this data independently, open a terminal on your own Primecoin node and run primecoin-cli <command>. Alternatively, open the Primecoin-Qt wallet, go to Help → Debug Window → Console, and type the command directly. The node must be fully synced to this block height for the commands to return results.

Cross-reference on Chainz Explorer

Chainz is an independent Primecoin block explorer. Compare this block's data to verify accuracy.

View Block #2,636,032 on Chainz ↗

Block #2,636,032

Cookie Preferences