This is the prime chain origin stored in the block header. It is a composite number (not prime itself) — it equals the first prime in the chain multiplied by a primorial. The origin anchors the entire chain to this specific block.

1.295 × 10⁹⁸(99-digit number)

12951365219419605596…99059035476158713250

Discovered Prime Numbers

Lower: 2^k × origin − 1 | Upper: 2^k × origin + 1

These are the actual prime numbers discovered by this block, computed using the verified Primecoin formula. Each number has been independently confirmed to pass the Fermat primality test. Use the FactorDB links to verify any number independently.

Level 0 — Twin Prime Pair (origin ± 1)

origin − 1

1.295 × 10⁹⁸(99-digit number)

12951365219419605596…99059035476158713249

Verify on FactorDB ↗Wolfram Alpha ↗

origin + 1

1.295 × 10⁹⁸(99-digit number)

12951365219419605596…99059035476158713251

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: origin + 1 − origin − 1 = 2 (twin primes ✓)

Level 1 — Twin Prime Pair (2^1 × origin ± 1)

2^1 × origin − 1

2.590 × 10⁹⁸(99-digit number)

25902730438839211193…98118070952317426499

Verify on FactorDB ↗Wolfram Alpha ↗

2^1 × origin + 1

2.590 × 10⁹⁸(99-digit number)

25902730438839211193…98118070952317426501

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^1 × origin + 1 − 2^1 × origin − 1 = 2 (twin primes ✓)

Level 2 — Twin Prime Pair (2^2 × origin ± 1)

2^2 × origin − 1

5.180 × 10⁹⁸(99-digit number)

51805460877678422386…96236141904634852999

Verify on FactorDB ↗Wolfram Alpha ↗

2^2 × origin + 1

5.180 × 10⁹⁸(99-digit number)

51805460877678422386…96236141904634853001

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^2 × origin + 1 − 2^2 × origin − 1 = 2 (twin primes ✓)

Level 3 — Twin Prime Pair (2^3 × origin ± 1)

2^3 × origin − 1

1.036 × 10⁹⁹(100-digit number)

10361092175535684477…92472283809269705999

Verify on FactorDB ↗Wolfram Alpha ↗

2^3 × origin + 1

1.036 × 10⁹⁹(100-digit number)

10361092175535684477…92472283809269706001

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^3 × origin + 1 − 2^3 × origin − 1 = 2 (twin primes ✓)

Level 4 — Twin Prime Pair (2^4 × origin ± 1)

2^4 × origin − 1

2.072 × 10⁹⁹(100-digit number)

20722184351071368954…84944567618539411999

Verify on FactorDB ↗Wolfram Alpha ↗

2^4 × origin + 1

2.072 × 10⁹⁹(100-digit number)

20722184351071368954…84944567618539412001

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^4 × origin + 1 − 2^4 × origin − 1 = 2 (twin primes ✓)

What this block proved

The miner who found this block proved the existence of 10 consecutive prime numbers forming a Bi-Twin Chain. The prime chain origin — the large number shown above — anchors the chain and is divisible by a primorial (the product of small primes), cryptographically tying these prime numbers to this specific block.

View full Prime Chain Discovery page →

★★☆☆☆

Rarity

UncommonChain length 10

How Primecoin's Proof-of-Work Constructs These Primes

Primecoin stores a value called the prime chain origin in each block. The miner found a large integer such that when divided by a primorial (the product of small primes: 2 × 3 × 5 × 7 × …), the result is the first prime in the chain. The origin is deliberately divisible by this primorial — that divisibility is part of the proof.

Prime Chain Origin = First Prime × Primorial (2·3·5·7·11·…)

Source: Primecoin prime.cpp — CheckPrimeProofOfWork()

This is why the origin has many small prime factors — those factors are the primorial divisor. The chain then extends from the first prime using the TWN formula:

TWN: twin pairs (p, p+2) where p = origin/primorial − 1 and p+2 = origin/primorial + 1

Verify on a Primecoin Node

Anyone running a Primecoin node can independently verify this block using the following RPC commands. Run these from the primecoin-cli command line or via the debug console in the Primecoin wallet.

1. Get block hash by height

getblockhash 509992

Returns the block hash for a given block height. Use this to confirm the hash shown above matches the chain.

2. Get full block data

getblock 9460f8b0c20d90ddaa7d5a4fb923d7f7506b57fbc8f20fe884ea83de1dbba5d4

Returns the full block header including difficulty, prime chain origin, prime chain type, transaction IDs, and all other fields shown on this page.

How to run these commands: To verify this data independently, open a terminal on your own Primecoin node and run primecoin-cli <command>. Alternatively, open the Primecoin-Qt wallet, go to Help → Debug Window → Console, and type the command directly. The node must be fully synced to this block height for the commands to return results.

Cross-reference on Chainz Explorer

Chainz is an independent Primecoin block explorer. Compare this block's data to verify accuracy.

View Block #509,992 on Chainz ↗