This is the prime chain origin stored in the block header. It is a composite number (not prime itself) — it equals the first prime in the chain multiplied by a primorial. The origin anchors the entire chain to this specific block.

2.553 × 10⁹⁶(97-digit number)

25534217473891234732…01044792181873704960

Discovered Prime Numbers

Lower: 2^k × origin − 1 | Upper: 2^k × origin + 1

These are the actual prime numbers discovered by this block, computed using the verified Primecoin formula. Each number has been independently confirmed to pass the Fermat primality test. Use the FactorDB links to verify any number independently.

Level 0 — Twin Prime Pair (origin ± 1)

origin − 1

2.553 × 10⁹⁶(97-digit number)

25534217473891234732…01044792181873704959

Verify on FactorDB ↗Wolfram Alpha ↗

origin + 1

2.553 × 10⁹⁶(97-digit number)

25534217473891234732…01044792181873704961

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: origin + 1 − origin − 1 = 2 (twin primes ✓)

Level 1 — Twin Prime Pair (2^1 × origin ± 1)

2^1 × origin − 1

5.106 × 10⁹⁶(97-digit number)

51068434947782469465…02089584363747409919

Verify on FactorDB ↗Wolfram Alpha ↗

2^1 × origin + 1

5.106 × 10⁹⁶(97-digit number)

51068434947782469465…02089584363747409921

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^1 × origin + 1 − 2^1 × origin − 1 = 2 (twin primes ✓)

Level 2 — Twin Prime Pair (2^2 × origin ± 1)

2^2 × origin − 1

1.021 × 10⁹⁷(98-digit number)

10213686989556493893…04179168727494819839

Verify on FactorDB ↗Wolfram Alpha ↗

2^2 × origin + 1

1.021 × 10⁹⁷(98-digit number)

10213686989556493893…04179168727494819841

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^2 × origin + 1 − 2^2 × origin − 1 = 2 (twin primes ✓)

Level 3 — Twin Prime Pair (2^3 × origin ± 1)

2^3 × origin − 1

2.042 × 10⁹⁷(98-digit number)

20427373979112987786…08358337454989639679

Verify on FactorDB ↗Wolfram Alpha ↗

2^3 × origin + 1

2.042 × 10⁹⁷(98-digit number)

20427373979112987786…08358337454989639681

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^3 × origin + 1 − 2^3 × origin − 1 = 2 (twin primes ✓)

Level 4 — Twin Prime Pair (2^4 × origin ± 1)

2^4 × origin − 1

4.085 × 10⁹⁷(98-digit number)

40854747958225975572…16716674909979279359

Verify on FactorDB ↗Wolfram Alpha ↗

2^4 × origin + 1

4.085 × 10⁹⁷(98-digit number)

40854747958225975572…16716674909979279361

Verify on FactorDB ↗Wolfram Alpha ↗

Difference: 2^4 × origin + 1 − 2^4 × origin − 1 = 2 (twin primes ✓)

Level 5 — Twin Prime Pair (2^5 × origin ± 1)

2^5 × origin − 1

8.170 × 10⁹⁷(98-digit number)

81709495916451951145…33433349819958558719

Verify on FactorDB ↗Wolfram Alpha ↗

What this block proved

The miner who found this block proved the existence of 11 consecutive prime numbers forming a Bi-Twin Chain. The prime chain origin — the large number shown above — anchors the chain and is divisible by a primorial (the product of small primes), cryptographically tying these prime numbers to this specific block.

View full Prime Chain Discovery page →

★★★☆☆

Rarity

RareChain length 11

How Primecoin's Proof-of-Work Constructs These Primes

Primecoin stores a value called the prime chain origin in each block. The miner found a large integer such that when divided by a primorial (the product of small primes: 2 × 3 × 5 × 7 × …), the result is the first prime in the chain. The origin is deliberately divisible by this primorial — that divisibility is part of the proof.

Prime Chain Origin = First Prime × Primorial (2·3·5·7·11·…)

Source: Primecoin prime.cpp — CheckPrimeProofOfWork()

This is why the origin has many small prime factors — those factors are the primorial divisor. The chain then extends from the first prime using the TWN formula:

TWN: twin pairs (p, p+2) where p = origin/primorial − 1 and p+2 = origin/primorial + 1

Verify on a Primecoin Node

Anyone running a Primecoin node can independently verify this block using the following RPC commands. Run these from the primecoin-cli command line or via the debug console in the Primecoin wallet.

1. Get block hash by height

getblockhash 2585397

Returns the block hash for a given block height. Use this to confirm the hash shown above matches the chain.

2. Get full block data

getblock 0ec4ce1c0654c6c01cee206466c37110221cc8502c16751a0c609872dd81c0bc

Returns the full block header including difficulty, prime chain origin, prime chain type, transaction IDs, and all other fields shown on this page.

How to run these commands: To verify this data independently, open a terminal on your own Primecoin node and run primecoin-cli <command>. Alternatively, open the Primecoin-Qt wallet, go to Help → Debug Window → Console, and type the command directly. The node must be fully synced to this block height for the commands to return results.

Cross-reference on Chainz Explorer

Chainz is an independent Primecoin block explorer. Compare this block's data to verify accuracy.

View Block #2,585,397 on Chainz ↗

Block #2,585,397

Cookie Preferences